Avantco MC34, Руководство пользователя

Страница: 6 / 6

- 6 -
User Manual
Troubleshooting
Compressor Will Not Start,
No Hum
Service cord unplugged Plug in service cord
Fuse blown or removed Determine reasons and correct
Control stuck open Repair or replace
Wiring incorrect Check wiring against the diagram
Compressor Will Not Start,
Hums but Trips Overload Protector
Improperly wired Check against the wiring diagram
Low voltage to unit Determine the reason and correct
Starting capacitor defective Determine the reason and replace
Relay failing to close Determine the reason, correct or replace
Compressor Starts & Runs
but Short Cycles on Overload Protector
Low voltage to unit Determine the reason and correct
Overload defective Check current, replace overload protector
Excessive head pressure Check ventilation or restriction in refrigeration system
Compressor hot-return gas hot Check refrigeration charge, fix leak if necessary