- 5 -
User Manual
Trouble Shooting
Compressor is Not Running
Fuse blown or circuit breaker tripped.
Replace fuse or reset circuit breaker.
Power cord unplugged.
Plug in power cord
Thermostat set too high.
Set thermostat to lower temperature.
Cabinet in defrost cycle.
Wait for defrost cycle to finish.
Cabinet Temperature is too Warm
Thermostat is set too high.
Set thermostat to lower temperature.
Airflow is blocked.
Re-arrange products to allow for proper air flow.
Make sure there is at least four inches of clearance
from the fan.
Low refrigerant levels.
Contact a service technician to chek refrigerant levels.
Door is slightly ajar.
Make sure door is completely closed.
Interior Light is Not Working
Poor switch connection.
Turn off light switch and turn it back on.
Bulb is not connected.
Make sure the bulb is correctly inserted in the socket.
Bulb has burned out.
Replace the bulb.
Condensation is Collecting on the Cabinet and/or Floor
Gasket is not sealing properly.
Clean, repair, or replace the gasket as necessary.
Warranty Information
Units in this manual are backed by a 1 year parts and labor warranty, with a 5 year warranty on the
compressor. For warranty inquiries or service, first locate:
• The model number and cabinet serial number (located on the front of the unit, or inside the
door jamb).
• The bold number on the service plate (located on the front of the unit).
Next, call 1-800-678-5517. Be sure to have the model number, cabinet serial number, and service
plate number available when contacting service technicians.
This warranty does not apply to, and Avantco is not responsible for, any warranty claims made on
products sold or used outside of the United States.
RESIDENTIAL USERS: Avantco assumes no liability for parts or labor coverage for component
failure or other damages resulting from installation in non-commercial or residential applications.
