User Manual
Clean Function
NOTE: Please empty the bin of ice in advance.
NOTE: Please clean and sanitize the bin and do a complete rinsing.
NOTE: Please clean and sanitize the ice sliding board, water distribution line,
water supply line, water pump, then do a complete rinsing.
• Turn on the ice maker; push “clean” button for 3 seconds, the ice maker will begin the
cleaning process. Put in the proper amount of cleaning solution manually into the water
trough followed by the clean and sanitizing process instruction.
• Push the “clean” button. The ice maker will do auto clean for about 15 minutes. Please spray
the evaporator with the cleaning solution in the meantime to ensure a complete clean. When
finished, the LED display will flash "Clean" slowly again.
• Put in the proper amount of sanitizing solution manually into the water trough followed by the
clean and sanitizing process instruction. Push the “clean” button again, the ice maker will do
auto sanitizing for about 15 minutes. Please spray the evaporator with the sanitizing solution
in the meantime to ensure complete sanitization. When finished, the ice maker will go into the
rinsing process, this process will take about 5 minutes, and do 5 rinsing cycles. Refer to your
cleaner and sanitizer for proper mixing & coding instructions.
• The ice maker will go back to making ice as soon as the cleaning process ends.
• Please throw away the next batch of ice in case of residual cleaner.
Manual Cleaning & Sanitizing
3. To empty the water from the tank
while the machine is running, press and
hold the “Clean” button for 3 seconds
and enter the cleaning mode to display
CLE. In the cleaning mode, press the “-”
button for 3 seconds to drain.
1.
Remove all ice from
the ice bin to avoid
contamination.
2.
Remove the 4 screws from
the top and bottom of the ice
machine’s front panel and
remove the front panel.
- 1
5
-
Note: Cut off
the power
supply after
draining
Cleaning Instructions
User Manual