User Manual
www.AvantcoEquipment.com 5
ELECTRIC SHOCK HAZARD
•
Wire unit into properly grounded electrical panel of the correct voltage, size, and
configuration.
•
Turn OFF power switch, unplug power cord/turn off power at circuit breaker, and allow
unit to cool before performing any cleaning, adjustments, or maintenance.
•
DO NOT submerge or saturate with water. Unit is not waterproof. Do not operate if unit
has been submerged or saturated with water.
•
Unit is not weatherproof. Locate unit indoors where ambient air temperature is a
minimum of 70°F (21°C).
•
Do not clean unit when it is energized or hot.
•
Do not steam clean or use excessive water on the unit.
•
This unit is not “jet-proof” construction. Do not use jetclean spray to clean this unit.
•
Do not pull unit by power cord.
•
Discontinue use if power cord is frayed or worn.
•
This unit must be serviced by qualified personnel only. Service by unqualified
personnel may lead to electric shock or burn.
FIRE HAZARD
•
Locate unit a minimum of 1" (25 mm) from combustible walls and materials. If safe
distances are not maintained, discoloration, or combustion could occur. Do not use
harsh chemicals such as bleach (or cleaners containing bleach), oven cleaners, or
flammable cleaning solutions to clean this unit. Use warm soapy water. Reference
cleaning instructions on page 9-10 for more information.
BURN HAZARD
•
Some exterior surfaces on unit will get hot.
•
Use caution when removing steam table pans from wells. Hot air escapes when a pan
is removed.
