NEVER RUN THE MIXER WITH HUB ACCESSORY AND AGITATOR AT THE SAME TIME
Set the timer #7 to the desired operating time between 1-30 minutes. The unit will NOT operate
unless the timer has been preset.
Close the safety guard #3. The unit will not operate if this guard and the bowl #6 are in the incorrect position.
The bowl can be lifted up and down using the bowl lift controls #10.
Set the desired mixing speed using the handle #2, suitable for the attachment fitted and the product being
processed. Please refer to the mixing speed chart on page
8
.
2
3
After the speed has been selected press the ON button #8. The unit will now run for the timed period set and
then switch OFF automatically.
The red emergency stop button if operated will shut down the machine at any time during the time cycle.
5
ALWAYS TURN OFF THE MACHINE BEFORE CHANGING SPEEDS. FAILURE TO DO SO MAY
DAMAGE THE GEARBOX AND VOID THE WARRANTY.
ALSO MAKE SURE THAT THE BOWL IS IN THE FULLY LIFTED POSITION AND THE SAFETY AND
THE SAFETY GUARD IS CLOSED.
L
ow speed is position #1 and the knob will be facing forwards.
Medium speed is position #2 and the knob will be facing
up
.
High speed position #3
and the knob will be facing
down
.
ALWAYS USE THE CORRECT ATTACHMENT FOR THE JOB.
Using The Attachment Hub
3. Insert and align the attachment shaft into the attachment hub, ensure that the attachment is fully inserted;
4. Tighten the hub mounting screw.
!
A.
Whisk:
Suitable for mixing liquids and soft ingredients, can work in all speeds.
Do not run for more than 15 minutes.
B..
Flat Beater:
Suitable for mixing dry ingredients , can work in low & medium speeds only.
Do not use in high speed. Do not run for more than 15 minutes.
1. Turn the mixer off and remove any agitator attachment;
2. Loose
n
the hu
b
mounting screw and remove the attachment hub cover;
13
12
FIGURE 10
1
Spatula
1
2
Dough Hook
1
3
Wisk
1
4
Bowl
1
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
Please ensure power supply matches your machine
Please ensure power supply matches your machine.
: Please stop machine first
before changing speed in order to avoid damage to the gear box
: Please stop machine first
before changing speed in order to avoid damage to the gear bo
: According to the different mixing material.
Choose the different mixing devicews and speed.
: According to the different mixing material.
Choose the different mixing devicews and speed
.
Be suitable for mix and stir batter, eggs and work with
in speed speed, working time isless than 15 minutes.
Be suitable for mix and stir batter, eggs and work with
in speed speed, working time isless than 15 minutes
Be suitable for mix and stir stuffing and raw material, and
work in middle speed, working time is less than 20 mins.
Be suitable for mix and stir stuffing and raw material, and
work in middle speed, working time is less than 20 mins
.
Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is 40%-50%.
Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is 40%-50%
.
13
12
FIGURE 10
1
Spatula
1
2
Dough Hook
1
3
Wisk
1
4
Bowl
1
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
Please ensure power supply matches your machine
Please ensure power supply matches your machine.
: Please stop machine first
before changing speed in order to avoid damage to the gear box
: Please stop machine first
before changing speed in order to avoid damage to the gear bo
: According to the different mixing material.
Choose the different mixing devicews and speed.
: According to the different mixing material.
Choose the different mixing devicews and speed
.
Be suitable for mix and stir batter, eggs and work with
in speed speed, working time isless than 15 minutes.
Be suitable for mix and stir batter, eggs and work with
in speed speed, working time isless than 15 minutes
Be suitable for mix and stir stuffing and raw material, and
work in middle speed, working time is less than 20 mins.
Be suitable for mix and stir stuffing and raw material, and
work in middle speed, working time is less than 20 mins
.
Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is 40%-50%.
Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is 40%-50%
.
13
12
FIGURE 10
1
Spatula
1
2
Dough Hook
1
3
Wisk
1
4
Bowl
1
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
Please ensure power supply matches your machine
Please ensure power supply matches your machine.
: Please stop machine first
before changing speed in order to avoid damage to the gear box
: Please stop machine first
before changing speed in order to avoid damage to the gear bo
: According to the different mixing material.
Choose the different mixing devicews and speed.
: According to the different mixing material.
Choose the different mixing devicews and speed
.
Be suitable for mix and stir batter, eggs and work with
in speed speed, working time isless than 15 minutes.
Be suitable for mix and stir batter, eggs and work with
in speed speed, working time isless than 15 minutes
Be suitable for mix and stir stuffing and raw material, and
work in middle speed, working time is less than 20 mins.
Be suitable for mix and stir stuffing and raw material, and
work in middle speed, working time is less than 20 mins
.
Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is 40%-50%.
Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is 40%-50%
.
13
12
FIGURE 10
1
Spatula
1
2
Dough Hook
1
3
Wisk
1
4
Bowl
1
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
Please ensure power supply matches your machine
Please ensure power supply matches your machine.
: Please stop machine first
before changing speed in order to avoid damage to the gear box
: Please stop machine first
before changing speed in order to avoid damage to the gear bo
: According to the different mixing material.
Choose the different mixing devicews and speed.
: According to the different mixing material.
Choose the different mixing devicews and speed
.
Be suitable for mix and stir batter, eggs and work with
in speed speed, working time isless than 15 minutes.
Be suitable for mix and stir batter, eggs and work with
in speed speed, working time isless than 15 minutes
Be suitable for mix and stir stuffing and raw material, and
work in middle speed, working time is less than 20 mins.
Be suitable for mix and stir stuffing and raw material, and
work in middle speed, working time is less than 20 mins
.
Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is 40%-50%.
Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is 40%-50%
.
13
12
FIGURE 10
1
Spatula
1
2
Dough Hook
1
3
Wisk
1
4
Bowl
1
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
Please ensure power supply matches your machine
Please ensure power supply matches your machine.
: Please stop machine first
before changing speed in order to avoid damage to the gear box
: Please stop machine first
before changing speed in order to avoid damage to the gear bo
: According to the different mixing material.
Choose the different mixing devicews and speed.
: According to the different mixing material.
Choose the different mixing devicews and speed
.
Be suitable for mix and stir batter, eggs and work with
in speed speed, working time isless than 15 minutes.
Be suitable for mix and stir batter, eggs and work with
in speed speed, working time isless than 15 minutes
Be suitable for mix and stir stuffing and raw material, and
work in middle speed, working time is less than 20 mins.
Be suitable for mix and stir stuffing and raw material, and
work in middle speed, working time is less than 20 mins
.
Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is 40%-50%.
Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is 40%-50%
.
13
12
FIGURE 10
1
Spatula
1
2
Dough Hook
1
3
Wisk
1
4
Bowl
1
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
Please ensure power supply matches your machine
Please ensure power supply matches your machine.
: Please stop machine first
before changing speed in order to avoid damage to the gear box
: Please stop machine first
before changing speed in order to avoid damage to the gear bo
: According to the different mixing material.
Choose the different mixing devicews and speed.
: According to the different mixing material.
Choose the different mixing devicews and speed
.
Be suitable for mix and stir batter, eggs and work with
in speed speed, working time isless than 15 minutes.
Be suitable for mix and stir batter, eggs and work with
in speed speed, working time isless than 15 minutes
Be suitable for mix and stir stuffing and raw material, and
work in middle speed, working time is less than 20 mins.
Be suitable for mix and stir stuffing and raw material, and
work in middle speed, working time is less than 20 mins
.
Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is 40%-50%.
Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is 40%-50%
.
1
4
Dough Hook:
Suitable for mixing dough, can work in low speed only. Do not use in high speed.
Do not run for more than 20 minutes. Absorption ratio must be more than 50%. Refer to mixer
capacity chart.
C
.
Operating Instructions for Normal Using
NOTE The bowl lift handle #5 is supplied loose and can be used to raise and lower the bowl in the
event of a power failure. THIS HANDLE MUST NOT BE FITTED IN NORMAL OPERATION.
User Manual
www.AvantcoEquipment.com
7