User Manual
Cleaning and Maintenance
WWW.AvantcoEquipment.com 8
Disassembling and Assembling the tanks
:
To disassemble and assemble the tanks or to
change the rubber tank gaskets :
1. Disconnect the unit by removing the plug.
2. Remove the cover from the tank.
3. Remove the mixing paddle from its shaft. For
the pump disassembling follow the instructions
reported on the diagram (Fig.6).
4. Lift container with both hands by a light,
VZLQJLQJPRWLRQ,IWKHUHLVGLI¿FXOW\SOHDVH
wet the cooling column and gasket.
5. To remove tap, lift it from its setting.
6. Change the gaskets for tanks and taps only
with the genuine gaskets that are supplied by
an authorised supplier.
To reassemble the unit, repeat the above
operations in reverse.
Fig. 6
