User Manual
Operating Instructions
WWW.AvantcoEquipment.com 5
Positioning
1. Do not install the appliance in the area where
a water jet could be used.
2. Place machine on a horizontal and sturdy
surface.
3. Please install the appliance in locations
where it can be overseen by trained
personnel.
4. For good ventilation, keep a distance of
7 inches, between unit and walls or
other objects. Increase the distance if the
obstacles are a heating source. When the
dispenser is in place, adjust the legs in order
to keep it level. (FIG.1)
Assembling
1. Remove the cover from the tank.
2. Hang the waste liquid container to hanging
holes on front panel.
3. Insert the taps (with gasket) to the tank and
through the tap lever
Electrical connection
Before inserting the plug into the electrical
socket, carefully read the following precautions:
1. Make sure that the machine is properly
FRQQHFWHGWRDQHI¿FLHQWJURXQGLQJV\VWHP
in compliance with current safety standards.
2. Make sure that the voltage is in accordance
with what indicated on the “serial number“
label applied on the chassis.
7KHFXUUHQWDYDLODEOHLVVXI¿FLHQWIRUWKH
maximum required by the machine.
4. If necessary, use only approved multiple
outlets, in compliance with current safety
standards.
If in doubt, consult only specialized technicians.
By law, the machine must always be
grounded.
Fig. 1
