
User Manual
www.AvantcoEquipment.com 3
IMPORTANT SAFETY INFORMATION
1 .
Read all instructions carefully and completely.
2 .
For commercial use only.
3 .
Do not touch hot surfaces.
4 .
Protect against electrical shock by keeping all cords, plugs, and other electrical components
away from water or other liquids.
5 .
Unplug this unit when not in use and before cleaning.
6 .
Allow the unit to cool before putting on or taking off parts.
7 .
Do not operate this or any appliance with a damaged electrical cord or plug.
8 .
Do not operate this or any appliance after it has malfunctioned or been damaged in any way.
9 .
Do not use outdoors.
10 .
Do not place on or near a hot gas or electric burner.
11 .
Attach plug to appliance first, then plug electrical cord into the wall outlet.
12 .
Disconnect the unit by turning the power switch to “OFF”, then removing the electrical plug from
the wall outlet.
13 .
Do not use appliance for any application other than intended use.
14 .
Do not insert metal utensils or oversized foods into this unit as they may cause a fire and
heighten the risk of electrical shock.
15 .
Do not store any item on top of this unit when in operation.
16 .
Do not allow this dehydrator to touch or be covered by flammable material, such as curtains,
draperies, walls, etc., when in operation.
17 .
Do not clean with metal scouring pads as pieces can break off and touch electrical components,
heightening the risk of electrical shock
18 .
Never place materials such as paper, cardboard, plastic, etc. in this dehydrator.
19 .
Do not cover interior of this unit with metal foil as it may cause the dehydrator to overheat.
20 .
Avoid scratching the surface or nicking the edges of this unit. Do not put sharp articles beyond
the net interior; it may choke the fan and cause product failure.
21 .
Note that the use of accessories not recommended by the manufacturer may result in injury.
22 .
Children should be supervised to ensure that they do not play with the dehydrator.
23 .
Place unit on a flat surface that is well ventilated.
NOTE: Save these instructions for future reference