background image

User Manual

4 www.AvantcoEquipment.com

Cleaning Instructions

1. To avoid electric shock or scalding, unplug the power cord and allow the unit to cool before cleaning.

2. Do not submerge the hot dog grill in water or directly apply liquids to clean unit.

3.  When cleaning the rollers, wipe from the end of the rollers to the center. This will reduce grease and particles 

from getting into the bearings. Proper cleaning may extend the life of the unit and extend the period between 
routine maintenances.

4. For product with high fat or sugar content, clean the rollers every 3-4 hours.

5.  Remove the hot dogs from the rollers when cleaning. Do not touch the heated rollers directly as this may result in 

burning or scalding.

6.  Do not clean rollers with abrasive cleaners or scouring pads because this may damage the rollers surface and the 

particles may get into the bearing.

Suggestions

1. Hot dogs must be fully unfrozen.

2.  Do not leave hot dogs on the grill too long to ensure the best results. If warming for more than four hours, the hot 

dogs may become thick and hard.          

Attack tough grease, oil, and carbon with this ready to use carbonizer 
and degreaser. Its unique formula is designed to clean ovens, grills, 
hoods and a wide variety of other surfaces. 

Содержание 177RG1830RC









Отзывы: