User Manual
4 www.AvantcoEquipment.com
Overview
Preparation
1. Set the unit on a flat, dry surface near a grounded 120V outlet.
2. Using a phillips head screw driver, attached the 2 metal posts to the base. Line up the 4 holes on
each post with the threaded holes in the base.
3. Once posts are secured to the base, place the strip heater on top of the posts. Line up the holes
and insert 4 screws into each post.
4. Place the food pan in the base.
Operation
1. Plug cord into grounded electrical outlet of the correct voltage. Electrical shock can occur if
appliance is not grounded.
2. Flip both the heat and light switches to the on position. Use of the light is optional and operates
independently from the heating elements.
3. Place food products in the pan, located directly under the elements for best results.
4. Turn unit off when not in use.
5. To disconnect appliance, turn switches off and remove plug from power source.
Cleaning
1. Unplug the cord and let warmer cool before cleaning or moving.
2. This unit can be cleaned with a damp sponge and mild soap. Rinse with clean water and wipe dry.
3. Do not immerse in water or other liquid.
MODEL #
POWER SUPPLY
OVERALL
DIMENSIONS
FOOD PAN
NET WEIGHT
PLUG
177FFDS1
120V 1000W
22.5"L x 13"W x 19.5"H
2"D
25 lbs.
NEMA 5-15P
