AVANT e5 Скачать руководство пользователя

Страница: 43 / 96

Avant e5

Operating instructions

Always remember

–

safety first. Test all the functions of the loader at an open and safe

place. Make sure that there are no persons in the operating area of the machine and the

danger zone of the attachment.

DANGER

Careless operation can injure you or bystanders - Keep the loader under control at

all times. Operating a powerful loader and its attachments requires the full attention of

the operator. Do not perform distractive actions while operating, such as using mobile

devices.

WARNING

Pay attention to other machines and persons that are moving in the area. Make sure that

there are no persons in the danger zone of the loader and the attachment. The danger

zone of the loader covers the reach area of the loader boom, the turning area on the side

and in the front and rear of the loader. Always put down the load when leaving the

machine

–

the loader is not designed to stay with the loader boom and load lifted. Learn

how to operate the loader in a safe place.

https://tractormanualz.com

Содержание e5

































































































Результаты поиска

Содержание e5

Отзывы:

Похожие инструкции для e5

Бренды по названию

Популярные бренды

AVANT e5, Руководство оператора

Результаты поиска

Содержание e5

Отзывы:

Похожие инструкции для e5

Бренды по названию

Популярные бренды