AVANT A37265, Руководство оператора для насадки

Страница: 20 / 28

20 (28)
CAUTION
Risk of thrown parts - Avoid running the attachment at very high speed. Operating
the attachment at too high speed may cause high vibrations, noise, or thrown parts from
the attachment, or damage that could lead to personal injury. See recommended input
flow in this manual.
DANGER
Risk of serious personal injuries - Never leave the equipment running unattended.
Start the attachment only when it is ready to be used. Do not go near the equipment
when another person operates the controls of the loader.
6.3 Preventing and clearing blockages
Keeping the rotating speed sufficiently high on demanding conditions is essential to avoid blockages. Wet
wood waste can get coiled around the cutting disc shaft. Keep the equipment clean, so that material will not
stick on it.
If blockage occurs, it needs to be cleared manually using suitable tools. Follow safe stopping procedure
before going near the stump grinder.
DANGER
Cutting hazard - Unexpected starting. Clearing a blockage can start the stump grinder
unexpectedly immediately after clearing the blockage, if the auxiliary hydraulics of the
loader is left on.
Always stop the loader by following the safe stopping procedure before going near the
stump grinder. Never reach to the device if the cutting disc can move.
To prevent accidents, turn the auxiliary hydraulics control lever of the loader to its neutral
position, shut down the loader engine and release the residual pressure always before
going near the attachment.
DANGER
Risk of serious personal injuries - Unexpected starting. To make sure that the
attachment will not rotate, disconnect the multiconnector (or hydraulic quick couplings)
before going near it.