17 (22)
6.3
Use
Setting the storage supports
Turn the storage supports (1) to their
upper position and set the attachment
to working position.
Adjusting the attachment to correct
working position
The Artificial turf maintenance brush
works in the most efficient way, when
the quick coupling bracket is set to
slightly forward tilted position, as shown
in the adjacent figure. The floating
position indicators (3) and the upper
edge of the quick coupling plate (4)
should be aligned on view from the
driver's seat.
The floating attachment bracket (2)
makes the sweeping easier and the
attachment follows the contour smootly.
When a suitable position is adjusted, lift
the loader boom by operating the boom
control lever only longitudinally. In this
way, the correct position is maintained,
when lowering the attachment.
Adjusting the loader speed
Set the loader speed according to the
material being handled and operating
conditions. Moderate loader speed is
usually enough to brush up the
compacted field’s fibers to make the
field softer again. In this way, the infill is
also distributed evenly, so that the field
stays softer longer time as well.
.
6.4
Transport position
Lift the brushes off the ground before
transport drive. Keep the loader stable.
Always transport the attachment as low
and close to the ground as possible. Keep
the telescopic boom retracted during drive.
