16 (22)
6.
Operating the attachment
Check the attachment and the operating environment once more before starting to work, and that all obstacles
have been removed from the operating area. Quick inspection of the equipment and the operating area before
use are parts of ensuring safety and the best performance of the equipment.
.
..
WARNING
Avoid running over persons - Check surroundings before driving.
Always look in the
direction the loader is moving. Before reversing, always ensure that bystanders,
especially children, are at a safe distance to avoid back-over accidents.
6.1
Checks before use
Use only when all pins are locked and secured in place.
Check the general condition of the attachment and the loader.
When mounting an attachment onto the tilt adapter, note that the locking pins must always be secured
manually.
Ensure that bystanders are at a safe distance when operating the equipment. Do not let anyone to
enter danger area of the boom or to stay directly in front of the loader. Also make sure that it is safe to
reverse with the loader. Never assume that bystanders will remain where you last saw them;
especially children are often attracted to the moving equipment.
Operate the attachment and the controls of the loader only when seated on the driver’s seat. Ensure
that the loader and the attachment are used in a safe manner and as intended. Do not allow children
to operate the equipment.
Never operate the loader or attachments while under the influence of alcohol, drugs, medication that
may impair judgement or cause drowsiness, or if not otherwise medically fit to operate the equipment.
Remember correct working methods and avoid leaving the driver's seat unnecessarily. Practise the
use of the attachment and the controls of the loader in a safe area. If you are unfamiliar with the
particular loader model, it is recommended to practise its use without any attachments.
.
..
6.2
Maximum ground pressure
Artificial turf areas may have a limit of maximum load or pressure on the surface. Check and verify that the
surface will not get damaged when driving a loader on them. To minimize chance of damage to the surface:
Check with the company that has installed the turf about how much pressure is allowed on the surface.
Use a loader that has grass pattern tyres on it.
Use the widest possible tyres.
Check tyre pressures, use the lowest permissible tyre pressure.
Remove additional counterweights from the loader.
Consider using a smaller loader model. At some areas it may not be possible to use larger, heavier loader
models.
Sudden stops may cause damage on the surface. Drive slowly and avoid abrupt
movements.
