background image

14 (18) 

 . 

6.3

 

Use 

Before starting to work:  

Read all safety instructions. 

Using the front cultivator: 

1.

Set the front cultivator to working position.

2.

Rake the surface by pushing the device slightly against the ground with the loader. Move the loader to

the desired direction forwards.

Always  drive  slowly  while  operating  the  front  cultivator.  Adjust  the  drive  speed  according  to  the
operating conditions and the ground.

If your loader is equipped with a telescopic boom, you can utilize it for a better view to the working
area.

NOTICE

Avoid sharp turns while operating the front cultivator. Lift the 

attachment

 off the ground 

before sharp turns. 

6.4

 

Operation with the tilt adapter 

When  working  on  slightly  inclined  terrains,  a  tilt  adapter  is  an  useful  attachment.  The  adapter  is  fitted  in 
between the attachment and the quick coupling plate of the loader. The adapter allows the attachment to be 
tilted sideways for efficient levelling or grading work. Read the instructions provided with the tilt adapter. More 
information  about  the  tilt  adapter  is  available  from  your  AVANT  dealer  or  from  the  AVANT  web  pages  at 
www.avanttecno.com. 

Содержание A36555



















Отзывы: