AVANT A33748 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 16

AVANT A33748 Скачать руководство пользователя страница 5

5(16)

Main components of backhoe:

1.  Frame
2.  Lifting boom
3.  Front boom
4.  Outrigger tine
5.  Adjustable outrigger
6.  Supporting bracket (the top link)
7.  Valve boom
8.  Valve boom bracket
9.  Service support

Listed below are the markings and labels fastened to the backhoe, and they must be visible on the
equipment. Replace the warning labels, if they have become unclear or detached completely. New labels are
available via your retailer or contact information provided on the cover page.

The warning decals contain important safety information. Replace damaged or

missing decals with new ones.

•

A46771 – Read the instructions before use.

•

A46772 – Do not go under a raised attachment; keep a safe
distance from raised or freestanding equipment.

•

A46803 – Crushing hazard, keep clear of moving parts.

•

A46797 – Crushing hazard in the reach area of the backhoe,
keep bystanders away from danger area.

A46771

A46772

A46803

A46797

Identification plate of the attachment

«
...
3
4
5
6
7
...
»

Содержание A33748

















Отзывы:

Нет отзывов