AVANT A2971, Руководство оператора для насадки

Страница: 21 / 26

21 (26)
.
6.7 Storing the attachment
To prevent the bristles from bending, it is important to ensure that the broom is stored correctly. If the broom is
left in a way that all the weight of the broom is applied on the brush, the bristles may bend permanently and
the performance of the broom will decrease.
The broom storage support (X) must be turned to its lower position for storage. Store the broom in a place
where it is easy to mount the next time it is used. If it is not possible to reach the quick attach plate of the
broom with the loader boom, it is advisable to use blocks of wood, for example, or other means, so that the
broom may be attached directly with the loader.
The best way to store the attachment is a place where it is protected from direct sunlight, rain, and extreme
temperatures.

Avoid storing the attachment directly against the ground, place a pallet or blocks of wood under it, for
example.

Place the multiconnector on to its holder. Never leave the hydraulic connector on the ground.

Make sure that the attachment is secured against all movements during storage.

Never climb on the attachment.
Clean the attachment before long storage periods and touch up the paint where needed to prevent rust
damage.
6.8 Working on uneven ground
Extra caution is needed when using the equipment on inclined terrains and slopes. Drive slowly especially on
inclined, uneven, or slippery surfaces, and avoid sudden changes in speed or direction. Operate the controls
of the loader with careful and smooth movements. Watch out for ditches, holes on the ground, and other
obstacles, as hitting an obstacle may cause the loader to tip over.
Maximum lifting capacity can not be achieved on inclined terrain. On horizontally tilted terrain the load must
not be lifted high. The loader frame articulation should be kept straight when lifting heavy loads; turning the
load during lifting operation will affect the stability of the loader and may lead to overturning of the machine.