AVANT A2971, Руководство оператора для насадки, Страница: 19 / 26

19 (26)
6.4 Floating mechanism
The Carousel broom is equipped with a mechanical floating system, which allows the broom to follow the
contours of the terrain without moving the loader boom. For the best performance of the broom, it is important,
that the floating is set correctly on an even surface.
The hinged boom of the Carousel broom allows the broom to lift and therefore it prevents pressing the brush
too hard against the ground. The floating of the loader boom (optional equipment for loaders) is not required
for using the carousel broom and it should be switched off.
Setting the floating:
On even surface adjust the position of the
loader boom and its quick coupling plate so the
rear of the broom is held supported by the
loader boom. The rear part of the broom
should be at clearly higher level than the front.
Note that tilting the broom too much forward
decreases the effective area of the broom,
hindering the work performance.
If the broom is set in parallel with the
ground, it will not sweep material to its
side, but the rear of the brush rotates
material around.
Do not use extra weight on the broom to ensure long service life of the brush.