Avant Tecno Oy Avant 850, Руководство оператора

Страница: 47 / 138

Avant 850 Controls and options of the Loader
47
.
Switches on the panel
The number of the additional control switches depends on which options have been installed on the loader.
The position and order of switches may be different than shown in this chapter.
On loaders with ROPS frame or CAB L: On loaders equipped with CAB GT:
All switches are located near the hand throttle
lever On loaders that that are equipped with the GT Cab there are
switches in separate groups:

Some switches are located near the hand throttle lever

Some switches are located above the instrument panel

Controls related to the heating of the cab are located on
the left of the seat base. For more information see page
69.
Extra work lights
2 at front, 1 rear
Optional equipment
Drive speed range selection
switch.
See page
Emergency blinker
Included in road traffic light
kit
Optional equipment
Warning beacon
Optional equipment
See page 67
Smooth drive
Optional equipment
See page 57
Hydraulic locking pins,
attachment coupling
Optional equipment
See page 86
Parking brake
See page 52
Opticontrol ®
Depending on the manufacturing date of the loader either of the
switches is for choosing the operating mode of the Opticontrol
® system.
If both are installed, the left switch is for the Opticontrol
®
system.
Optional equipment. See page 54
NOTE: Some of the switches presented here are for optional equipment and might not be installed on the loader.