Avani SPC-2000 Скачать руководство пользователя

Страница: 3 / 26

SPC-2000

AVANI Welding Fume Extractor

General Safety Information

MACHINE WARNING SIGNS

Indicates an imminently
hazardous situation which,
if not avoided, will result in
death or serious injury.

Indicates a potentially
hazardous situation which,
if not avoided, could result
in death or serious injury.

Indicates a potentially
hazardous situation which,
if not avoided, may result
in minor or moderate
injury.

Used without the safety
alert symbol ( ) indicates
potentially hazardous
situation which, if not
avoided, may result in
property damage.

Warning of electric shock

Do not expose the
equipment to rain or use in
damp locations.

Do not use the equipment
around flammable
products, if not avoided,
sparks can ignite vapors
from flammable products.

Read and understand all
warnings and operating
instructions before using
this equipment. Failure to
follow all instructions may
result in electric shock, fire,
and/or serious personal
injury or property damage.

Содержание SPC-2000



























Результаты поиска

Содержание SPC-2000

Отзывы:

Похожие инструкции для SPC-2000

Бренды по названию

Популярные бренды

Avani SPC-2000, Руководство пользователя

Результаты поиска

Содержание SPC-2000

Отзывы:

Похожие инструкции для SPC-2000

Бренды по названию

Популярные бренды