7
How to clean the machine body and lid
1. Remove the measuring cup and rubber seal from lid.
2. Clean the measuring cup, lid and rubber seal in warm water. Use the provided brush to clean
thoroughly. These parts can also be cleaned in an automatic dishwasher.
3. Wipe them with a soft clean towel.
4. Wipe the machine body and power cord carefully with a soft damp cloth
Warranty
In the event of a problem with your item please contact
This product is guaranteed against manufacturing defects for a period of 1 years.
This does not cover the product where the fault is due to misuse, abuse, use in contravention of
the instructions, or where the product has been the subject of unauthorised modifications or
alterations, or has been the subject of commercial use.
If the Blender is shown to have had an inherent defect present at the time of sale, Avancer will
provide you with a replacement.
According to the Waste Electrical and Electronic Equipment (WEEE) directive, WEEE should be
separately collected and treated. The above symbol on the product or its packaging indicates that
this product is not to be handled as normal household waste but is to be taken to a recycling
collection point for electrical and electronic goods. By correctly disposing of this product you are
contributing to the protection of the environment and to the health of your fellow human beings.
Improper disposal endangers health and the environment. Further information about the recycling
of the product may be obtained from your local council, refuse collection department or the store
where you purchased the product.
