5.
TOUCHSCREEN CONTROLS
Start/Stop Button:
Pressing
START/STOP
( ) once starts and runs the machine,
while pressing the button again stops the machine and the blade.
Speed Buttons:
Press the
+ SPEED
button to increase the speed of the blade.
Every press adds a speed, from 1 to 8. Press the
– SPEED
button to decrease
the speed of the blade, from speed 8 to 1. These settings are used to set the
blending speed for custom programming, the
PULSE
button, and the
START/
STOP
button.
Time Buttons:
Press the
+ TIME
button to increase the time. Every press adds 1
second. Press the
– TIME
button to decrease the time by 1 second. These
settings are used to set the blending time for custom programming, the
PULSE
button, and the
START/STOP
button. Long-press the
+ TIME
or
– TIME
button to automatically increase or decrease the time.
Pre-Programmed Buttons:
These buttons,
P1
through
P5
, are pre-programmed
to blend the most commonly made drinks. Pressing one of these buttons will
automatically start a cycle that has been programmed for a certain amount of
time, at a specified speed. The machine will stop once the cycle is complete,
and each button can be reprogrammed to any recipe through custom
programing. See page 6 for instructions on creating custom programming.
Pulse Button:
The
PULSE
button provides a quick increase or decrease in speed of
the blade when blending a drink. Press
to start pulsing, and use
+/- SPEED
buttons to increase and decrease the motor speed between 1-8. The
PULSE
button will override the running program as long as it is pushed. Once released,
the original program continues its cycle.
