9.
CLEANING
GENERAL CLEANING
Wash, rinse, sanitize and dry the container prior to initial use.
Blender containers should be cleaned after EVERY use to prevent residue
build up around the blade assembly
1.
Remove the container from the blender base and remove the jar cover.
2.
Add cleaning solution such as Noble Chemical Sunbright (147SUNBRIGHT) to
the container. Scrub and flush out the container interior, cover, and filler cap to
remove food residue and empty the container.
3.
Fill container 1/4 full with fresh cleaning solution and place it on the base.
4.
Replace the cover on the container and run the blender on speed 8, high speed,
for 2 minutes.
5.
Repeat step 3 & 4 using clean rinse water (95°F).
6.
Wipe down the container, filler cap, and cover with a soft cloth or sponge,
dampened with fresh cleaning solution.
7.
Wipe the exterior of the base with a damp cloth or sponge.
WARNING:
The base contains electrical components.
DO NOT
immerse in water or cleaning solution.
DO NOT
use a high-pressure washer or dishwasher to clean the base.
8.
Allow all parts to air dry.
SANITIZING
1.
Wash container as instructed above.
2.
Fill container 1/4 full with preferred sanitizing solution such as Noble Chemical
Sani-512 (147SANI512) and place on base.
3.
Replace cover and filler cap and run on speed 1, low speed, for 2 minutes, then
empty the container.
4.
Wipe the container exterior with a soft cloth or sponge dampened with
sanitizing solution.
5.
Allow all parts to air dry.
NOTE: DO NOT
rinse container, cover, or filler cap after sanitizing.
6.
When ready to use, rinse with clean water.
