Avalue Technology VMS-BYT Скачать руководство пользователя страница 9

Страница: 9 / 117

Quick Reference Guide

VMS-BYT Quick Reference Guide

3. ACC Function (JACC1)

It is Vehicle PC power mode (Power on/off controlled by Ignition or Power button) if ACC Function sets

up as Enable.

It is Industrial PC power mode (Power on/off controlled by Power button) if ACC Function sets up as

Disable.

4. AT/ATX Jumper (JAT1)

This function will be active if ACC Function (JACC1) sets up Disable (Industrial PC power mode).

5. Power Input Selection (SW2)

To set up the DC input voltage is +12Vdc, +24Vdc or wide range from +9~36Vdc.

6. Vin Work/Shutdown (BIOS)

To set up the startup/shutdown voltage in accordance with DC input voltage as +12Vdc, +24Vdc or wide

range from +9~36Vdc.

Mode

+12Vdc

+24Vdc

Startup

Shutdown

Startup

Shutdown

11.5V

10.5V

23V

21V

12.0V

11.0V

24V

22V

12.5V

11.0V

25V

22V

12.5V

11.5V

25V

23V

The following behaviors happen if ACC Function (JACC1) sets up as Enable:

VMS-

BYT won’t power on if the DC Input voltage is lower than the startup voltage.

VMS-BYT will automatically power on, if the DC input voltage reaches the startup voltage.

VMS-BYT will automatically power on, if the DC input voltage reaches the startup voltage and power on

delay ends up (the power on delay is Enable in BIOS).

VMS-BYT will automatically power off, if the DC input voltage is lower than shutdown voltage, and the

time exceeds 60sec. If it stil

l doesn’t power off and the time exceeds 6min, VMS-BYT will be forced

power off immediately.

7. Power on delay time is selectable by BIOS in following hierarchies

10sec / 30sec / 1min / 5min / 10 min / 15min / 30min / 1hr.

The delay time starts to count if ignition turns on.

User can skip the delay time to turn on VMS-BYT if pressing power button.

VMS-BYT will automatically power on if the delay time ends up.

8. Power off delay time is selectable by BIOS in following hierarchies

20sec / 1min / 5min / 10min / 30min / 1hr / 6hr / 18hr.

The delay time starts to count if ignition turns off.

User can skip the delay time to turn off VMS-BYT if pressing power button.

VMS-

BYT will automatically power off, if the delay time ends up. If it still doesn’t power off and the time

exceeds 60sec, VMS-BYT will be forced power off immediately.

9. S3, S4 suspend mode

In the vehicle power mode, the S3/S4 is only able to resume from power button.

Содержание VMS-BYT






















































































































Результаты поиска

Содержание VMS-BYT

Отзывы:

Бренды по названию

Популярные бренды

Avalue Technology VMS-BYT, Краткое руководство пользователя

Результаты поиска

Содержание VMS-BYT

Отзывы:

Бренды по названию

Популярные бренды