Avalue Technology VMS-BYT Скачать руководство пользователя страница 75

Страница: 75 / 117

Quick Reference Guide

VMS-BYT Quick Reference Guide

Enabled

Fast Boot

Disabled

[Default]

Enabled

Enables or disables boot with initialization of a

minimal set of devices required to launch

active boot option. Has no effect for BBS boot

options.

Boot Option #1/2

Set the system boot order.

3.6.6

Save and exit

3.6.6.1 Save Changes and Reset

Reset the system after saving the changes.

3.6.6.2 Discard Changes and Reset

Any changes made to BIOS settings during this session of the BIOS setup program are

discarded. The setup program then exits and reboots the controller.

3.6.6.3 Restore Defaults

This option restores all BIOS settings to the factory default. This option is useful if the

controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting.

3.6.6.4 Launch EFI Shell from filesystem device

Attempts to Launch EFI Shell application (Shellx64.efi) from one of the available filesystem

devices.

Содержание VMS-BYT






















































































































Результаты поиска

Содержание VMS-BYT

Отзывы:

Бренды по названию

Популярные бренды

Avalue Technology VMS-BYT, Краткое руководство пользователя

Результаты поиска

Содержание VMS-BYT

Отзывы:

Бренды по названию

Популярные бренды