SID-15V-Z37-A1R User Manual
Page 17 of 24
Revision 1.0
4.3
R
OUTING THE
C
ABLES
T
HROUGH THE
B
ASE
F
IG
.
4C:
C
ABLE
R
OUTING THROUGH
S
TAND
P
ASS
-T
HROUGH
Route the cables through the pass-through hole along the backside of
the unit and up through the center hole that the Arm was taken out of.
NOTE: This pass-through hole should be lined with a plastic cable
bushing to prevent cable wear.
Gather the cables to the front of the hole, and insert the Arm back into
the hole.
Please use caution when doing this and make sure that no
cables will be pinched between the bottom of the Arm and the
bottom base plate. The cables should run through the pass-
through along the back and hug around the arm up the top of the
Bases hole opening.
Mount the Arm back onto the Base using the 3 screws that were
removed earlier.
