Avalue Technology FPC-1736, Краткое руководство пользователя

Страница: 38 / 51

FPC-1736
38 FPC-1736 Quick Reference Guide
* In the case that user needs to update ME firmware, user should set
‘ME FW Image
Re-Flash
’ as [Enabled], save the settings and exit. The system will turn off and reboot
after 4 seconds. If the user goes to BIOS screen again will find this item is set again as
[Disabled], but user can still re-flash to update firmware next time.

Trusted Computing
Press [Enter] to make settings for the following sub-items:
Configuration
Security Device Support
Use this item to enables or disables BIOS support for securlty device. O.S. will
not show Security Device. TCG EFI protocol and INT1A interface will not be available

ACPI Settings
Press [Enter] to make settings for the following sub-items:
ACPI Settings
ACPI Sleep State
Use this item to select the highest ACPI sleep state the system will enter when the
suspend button is pressed.
The optional settings are: [Suspend Disabled]; [S3 (Suspend to RAM)].

Wake-up Function Settings
Press [Enter] to make settings for the following sub-items:
Wake-up System with Fixed Time
Use this item to enable or disable system wake on alarm event.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], system will wake on the hour/min/sec specified.
Wake-up Hour
Use this item to select 0-23 for example enter 3 for 3am and 15 for 3pm
Wake-up Minute
Use this item to select 0-59
Wake-up Second
Use this item to select 0-59
Wake-up System with Dynamic Time
Use this item to enable or disable system wake on alarm event.
System will wake on the current time + Increase minute(s).
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], system will wake on the current time + increased minute(s).
Wake-up Minute Increase
Use this item to select 1-60
PS2 KB/MS Wake-up
Use this item to enable or disable PS2 KB/MS wake-up from S3/S4/S5.