User
’s Manual
EMX-945GSE Series User
’s Manual
31
2. Serial Port connectors (9-pin COM3, COM4)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
3. CPU, Power and Chassis fan connectors (3-pin CHA_FAN)
The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of
1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the
motherboard, making sure that the black wire of each cable matches the ground pin of the
connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient
air flow inside the system may damage the motherboard components.
These are not jumpers! DO NOT place jumper caps on the fan
connectors.
Содержание EMX-945GSE Series
Страница 21: ...User s Manual EMX 945GSE Series User s Manual 21 For EMX 945GSE A1R with VGA connector only...
Страница 40: ...EMX 945GSE Series 40 EMX 945GSE Series User s Manual For EMX 945GSE A1R support 24bit x 2CH LVDS...
Страница 55: ...User s Manual EMX 945GSE Series User s Manual 55 2 3 4 Integrated Peripherals...