Avalue Technology EMX-945GSE Series, Руководство пользователя

Страница: 24 / 70

EMX-945GSE Series
24 EMX-945GSE Series User
’s Manual
2. Remove the system unit cover (if your motherboard is already installed in a chassis).
3. Remove the bracket opposite the slot that you intend to use. Keep the screw for later
use.
4. Align the card connector with the slot and press firmly until the card is completely seated
on the slot.
5. Secure the card to the chassis with the screw you removed earlier.
6. Replace the system cover.
1.7.2 Configuring an Expansion Card
After installing the expansion card, configure it by adjusting the software settings.
1. Turn on the system and change the necessary BIOS settings, if any. See Chapter 2 for
information on BIOS setup.
2. Assign an IRQ to the card if needed. Refer to the tables on the next page.
3. Install the software drivers for the expansion card.
1.7.3 PCI slots
The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards
that comply with PCI specifications. The figure shows the type of LAN card that can be
installed on a PCI slot.