Avalue Technology EBM-APL, Руководство пользователя, Страница: 11 / 77

User’s Manual
EBM-APL
User’s Manual
11
1.5 System Specifications
System
CPU
Onboard Intel® Pentium® /Celeron® /Atom
™
SoC BGA Processor (Apollo Lake
Platform)
BIOS
AMI uEFI BIOS, 128Mbit SPI Flash ROM
System Chipset
Apollo SoC integrated
I/O Chip
EC(IT8528E), EC (IT8528I) for Wide temp. model
System Memory
One 204-pin DDR3L SODIMM Socket, Supports 4G/8G & up to 8GB DDR3L
1866MTs SDRAM (Non-ECC)
SSD
1 x M.2 B key (2242) support SATA/PCIex1/USB interface for SSD
Watchdog
Timer
H/W Reset, 1sec. ~ 65535sec. and 1sec./step
H/W Status
Monitor
Monitoring System Temperature, Voltage and FAN Status with Auto Throttling
Control
Expansion
1 x Mini PCIe connector
(for PCIe & USB2.0 & SIM Card)
Built-in Touch
screen
(optional)
EETI ETP-CP-MER4485XRU
1 x 5-pin 2.54mm Pin Header (90 Degree Right Angle Pin Header)
I/O
MIO
1 x SATA III (1 x 1x2 pin wafer w/2.0mm pitch for SATA Power)
7+15pin SATA (BOM Optional), board not support SATA interface of M.2 when use
7+15pin SATA
2 x DB-9 male connector for COM1/2(RS-232/422/485 selected by jumper w/ Auto
Flow), 4xRS-232 (Pin Header)
LPCx1, SPIx1
USB
4 x USB3.0 (dual deck USB connector for 2 USB3.0 port), 4 x USB2.0 (pin header &
via USB Hub to 4 USB2.0)
GPIO
16bit GPIO ( 2 x 10 pin wafer w/2.0mm pitch ) 8 x In, 8 x Out
*1 x SIM socket
*Backlight
1. 1 x 2 x 3 pin w/2.0mm pitch (VR voltage adjustment)-- 1/3/5 pin connected to EC
2. 1 x 1 x 5 pin wafer w/2.0mm pitch
3. 1 x 1 x 3 pin header w/2.0mm pitch(DC/PWM)-- 1pin for PWM, 3pin for DC
*1 x 6pin DIP Switch for COM1 & COM2(RS232/422/485 selection), AT/ATX, Touch
on/off
*1 x 2 x 5 pin wafer w/2.0mm pitch for Front Panel
Display