12
change the clock to the desired time for the unit to automatically turn on. The minutes will increase by 10
with each press of the
MIN
button and the hours will increase by 1 with each press of the
HOUR
button.
Press the
T-OFF
button and the remote control display will flash the desired auto-off timer. Press the
MIN
and
HOUR
buttons to change the clock to the desired time for the unit to automatically turn off. The timer
is set when the auto-off time stops flashing and the words “ON” and “OFF” are displayed next to the time.
NOTE:
you can set either T-ON or T-OFF, also can set both T-ON and T-OFF . If you set both T-ON and T-
OFF simultaneously, the timer will always cycle effectively unless removed either T-ON or T-OFF.
OPERATING THE UNIT
Air Conditioner Mode
1) Install the exhaust hose and window kit properly (see pages 7 & 8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the
POWER
button.
4) Press the Mode button until the air conditioner mode icon light up on the control display.
5) Press the
+
or - buttons until the desired room temperature appears on the control panel dis-
play. The temperature ranges from 61
°
F - 88
°
F (16
°
C - 31
°
C).
6) Select the desired fan speed by pressing the
FAN
button by using the Remote control.
NOTE:
During hot days, the unit will cool the room most efficiently by setting the temperature at the lowest
setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the exhaust hose
and window kit, and keeping direct sunlight to a minimum will also improve the cooling efficiency.
NOTE
:
When the unit is running on cooling mode, the exhaust hose is required and must be vented
outside using the supplied window kit.
Dehumidifier Mode
1) Install the exhaust hose and window kit properly (see pages 7 & 8 ).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the
POWER
Button.
4) Press the
MODE
button until the dehumidifier mode icon light up on the control panel display.
NOTE:
The unit operates at low fan speed during dehumidifier mode. The unit cools room slightly during
the dehumidification. Keep the windows and doors closed to aid the effectiveness of the unit in re-
moving the moisture from the room.
NOTE
:
When the unit is running on dehumidifier mode, the exhaust hose is required and must be
vented outside using the supplied window kit.
NOTE:
The unit will not perform in dehumidifier mode when the room temperature is lower than 61
°
F .
Fan Mode
1) Plug the Power Cord into an electrical outlet.
2) Turn on the unit by pressing the
POWER
button on the control panel.
3) Press the
MODE
button until the fan mode icon light up on the control panel display.
