11
REMOTE CONTROL OPERATING INSTRUCTIONS
1)
Power On and Off
- If the unit is already on, press the
POWER (
I/O
)
button on the remote while point-
ing the remote away from the unit. This will turn the remote on. If the unit is off, now press the
POWER
(
I/O
)
button once to manually turn the unit on. Press the Power button once more to turn the unit off.
When you press the
POWER
button the upper right square on the remote control LCD Display will light
up. When in Air Conditioner and Auto mode, the selected temperature will appear on the remote control
display. When the unit is in Fan mode and Dehumidifier mode you will see the “- -” icon instead of the set
temperature. This shows that temperature selection is not available when the unit is in Fan or Dehumidifier
mode. When the unit is in Fan mode you will see the “F*” icon instead of the set temperature on the con-
trol panel of the unit.
2)
Mode Selection
- Press the
MODE
Button repeatedly to cycle between the different modes: Auto, Air
Conditioner, Dehumidifier, and Fan only mode. The upper left square on the Remote control display will
light up showing which mode is selected. In Air Conditioner mode the display will show “
COOL
”, in De-
humidifier mode the display will show “
DRY
”, in Fan mode the display will show “
FAN
”, and in Auto
mode the display will show “
AUTO
”.
3)
Fan Speed
- Press the
FAN
speed button to cycle through high, medium, and low fan speeds. The dis-
play on the remote control will show HIGH, MED, LOW under the “SPEED” label on the remote control
LCD display. There is an additional
auto
speed setting that is enabled in only cooling mode. This speed is
next setting after low when pressing the
FAN
speed button on the remote control. The speeds will cycle
through in this order:
High, Medium, Low, Auto
. Each change in speed will be associated with a “beep”
sound from the unit. The remote control will not display “AUTO” under the speed label. Once Auto fan
speed is selected the unit will beep and there will not be a fan speed displayed on the remote control.
4)
Temperature Setting
- When the unit is in Air Conditioner mode you can select your desired tempera-
ture. Press the +or - to select your desired temperature setting. The temperature on the LCD display on the
remote control will increase or decrease accordingly. Pressing the -and + buttons simultaneously will
change the temperature select between °F and °C.
5)
SLEEP MODE
- To set Sleep mode, make sure the unit is in Air Conditioner mode. Press the
SLEEP
Button on the remote control, The display on the remote control will show the “SLEEP” icon on the remote
control LCD display. When in
SLEEP
mode, the fan will run on low to keep fan noise at a minimum.
When in Air Conditioner mode, the temperature setting will gradually increase to 2°F above the original
set temperature for 6 hours. After 6 hours the temperature setting will return to the set temperature. When
in Dehumidifier mode, the temperature will not change when Sleep mode is selected.
6)
CLOCK
- To set the clock on the remote control, hold down either the
MIN
or
HOUR
button until the
displayed time flashes on the remote control display. Change the minutes by pressing the
MIN
button and
change the hours by pressing the
HOUR
button. Set the clock prior to programming the timer.
7)
TIMER
- To program the timer, first press the
T-ON
button. Once
T-ON
is pressed the auto-on timer will
blink in the bottom right rectangle of the remote control display. Press the
MIN
and
HOUR
buttons to
Fan Speed
High
Medium
Low
Auto
Remote control display
HIGH
MED
LOW
Unit control display
F3
F2
F1
FA
