Avallon AWBC242GGFD, Руководство пользователя

Страница: 11 / 22

11
Leveling the Refrigerator
The refrigerator should be installed on a firm and level surface that will
be able to support the entire weight of a fully loaded unit. It is important
for the refrigerator to be leveled in order to work properly. It can be
raised or lowered by rotating the plastic sheaths around each of the feet
on the bottom of the machine. If you find that the surface is not level,
rotate the feet until the refrigerator becomes level. You may need to
make several adjustments to level it. We recommend using a carpenter’s
level to check the machine. Turn the leveling feet to the right to lower
that side of the refrigerator. Turn the leveling feet to the left to raise that
side of the refrigerator.
Important: Once you are ready to install the unit in a cabinet or directly on the floor, you must
adjust the feet to level the refrigerator.
!
Installing the Door Handles
Caution: Do not over-tighten the screws as this may cause damage to the handle or to the stainless
steel door.
!
To install the door handles:
1. Open the door and carefully pull the door gasket around the area where the handle is to be installed.
2. Insert each Phillips head screw through the gasket side of the door until the screw passes through the door.
3. Align the handle with the screws and tighten using a Phillips head screwdriver until the handle is flush
against the door frame.
4. Carefully press the door gasket into its original position.
5. Repeat steps for other door.