Avallon AWBC241GGFDBLSS, Руководство пользователя

Страница: 12 / 21

7
INSTALLING THE SHELVES:
Left Zone
1. Open the door completely.
2. Push the shelf tracks affixed to the walls of the inner cabinet to the rear of the unit so that the tracks
are fully seated inside the cooler compartment.
3. Line up the rails affixed to the shelf with the corresponding wine and beverage cooler tracks attached
to the inner cabinet walls.
4. Push the front of the shelf inwards evenly until the shelf rests fully inside of the unit and you are able
to close the door.
5. The shelf should glide smoothly back and forth. If it does not, you may need to remove it and start
over.
Right Zone
1. Open the door completely.
2. Ensure that the metal guide posts are attached to the rear of the shelf.
3. Tilt the shelf 45° counterclockwise. The metal guide post on your left side should rest on the shelf
track.
4. Gently push the shelf back towards the rear of the unit until the right side metal guide post meets
the vertical indentation in the plastic interior cabinet.
5. Gently set the right side of the shelf down on the shelf track. The shelf should move forwards and
backwards smoothly.
REMOVING THE SHELVES:
Left Zone
1. Open the door completely.
2. Remove all of the contents loaded on the shelf, if applicable.
3. Pull the shelf towards yourself until it is fully extended outward.
4. The shelf has plastic posts on both sides as indicated in the diagram below. While facing the unit,
press the plastic post on the right side down while pulling up on the left plastic post. You may
choose to do this by hand or by using a flathead screwdriver.
5. Evenly pull out the shelf from the track until it is completely removed from the inner compartment.