AW5802xTP
User’s Manual
PAGE 8
Technical Support (650) 384-0000
www.avalanwireless.com
Admin Page Settings: The Admin page has Statistics and Device Information sections similar to the
Login page plus the addition of several new sections.
Device Settings: Here you may change the Login Password, select the RF Channel to use (or enable
Automatic Channel Mode) and modify the Network configuration.
RF Channel selection: In Automatic Channel Mode, the Access Point radio will choose a channel based
on avoiding interference from other RF sources, changing it as necessary if block error rates rise.
The Subscriber Units will search for and select the frequency channel used by the Access Point. If
you have multiple AW5802 Family Access Points operating in the same vicinity or other known sources
of interference, choose a channel manually. We recommend also setting the Subscriber Units paired
with each Access Point to the same channel so that they won’t have to hunt for it.
Spectrum Scanner: Scrolling down on the Admin page brings you to the Spectrum Scanner as shown
here:
The Spectrum Scanner controls are self-explanatory. Executing a scan interrupts data flow, so you
will normally want to turn automatic scanning off. Please note that this Spectrum Scanner works well
with Internet Explorer and Firefox browsers, but may not work with Chrome or Safari due to browser
javascript differences.
MAC Address Routing Table: Another section visible in this screen shot is the MAC Address to Device
ID Routing Table. If radios are linked, this information allows you to determine exactly which devices
are communicating through each Subscriber Unit’s Device ID.
Scrolling down to the bottom of the Admin Page reveals two more sections as shown on the next page
of this manual:
