PAGE 11
Technical support
(650) 384-0000
www.avalanwireless.com
User’s Manual
AW5802mTR
To add a new SU to the AP, disconnect the AP from the network and power off.
Connect an Ethernet cable between the SU and AP. Power up the SU FIRST and then
the AP. The SU will receive the key. Disconnect the Ethernet cable and cycle power
on the SU to cause the new keys to take effect.
To re-key SUs to a new AP, proceed as in the inital setup, making sure to power up
the AP FIRST.
Technical specifications
Characteristic
Specification/Description
RF transmission rate
1.536 Mbps
Ethernet data rate
935 Kbps
Receiver Sensitivity
-97 dBm at 10
-4
Bit Error Rate
Range
Up to 30 miles line-of-sight with 22 dBi antennas
RF channels/bandwidth
59 non-overlapping with 2.048 MHz spacing and 1.75 MHz
bandwidth, automatic or manually selectable via web
browser interface
Connector types
RF: RPSMA Female / 10/100 base T Ethernet: RJ-45
Data Encryption
128-bit AES, FIPS197, keys set through password-pro-
tected browser interface
Error correction technique
Sub-block error detection and retransmission
Power regulation
Built-in switching regulator
Browser management tools
QoS Statistics, Network Settings, Spectrum Analyzer,
Firmware Upgrade
Power consumption
Transmit: 2.2 Watts Receive: 1.2 Watts
Voltage
9 to 48 VDC via unused pins in RJ-45 jack - pins 4,5
positive, 7,8 ground
Power regulation
Switching regulator
Transmit current draw
180 ma at 12 VDC
Operating Temperature Range
-40 ºC to +80 ºC
Size
70 x 66 x 23 mm, 40 grams