background image

Features

  Compliant to SFF-8642: Mini Multilane Series: Shielded 

Integrated Connector, and InfiniBand Architecture 

Specification V2 R1.3 for CXP Interface

  Multi-rate capable from 11 Gbps to 12.5 Gbps

  High Channel Capacity: 150 Gbps per module, bi-

directional, with twelve independent Transmitters and 

Receivers each

  Operates at 12.5 Gbps per channel with 64b/66b 

encoded data for proprietary application

  Hot Pluggable

  Links up to 50 m using OM3 fiber and 65 m using OM4 

fiber

  0 to 70 °C case temperature operating range

  3.3 V power supply only

  Low power dissipation of < 3.5 W

  Proven High Reliability 850 nm technology: Avago 

VCSEL array transmitter and Avago PIN array receiver

  Two Wire Serial (TWS) interface with maskable interrupt 

for expanded functionality including:
–  Individual channel functions: channel/output dis-

able, squelch disable, and lane polarity inversion

–  Diagnostic Monitoring functions: module tempera-

ture and supply voltages, per channel laser current 

and laser power, and input receiver power

–  Status per channel: Tx fault, electrical (transmitter) 

and optical (receiver) LOS, and alarm flags

  Utilizes a standard 24 lane optical fiber with MTP

 

(MPO) optical connector for high density and thin, 

light-weight cable management

Description

The Avago Technologies AFBR-83CDZ is a Twelve-Chan-

nel, Pluggable, Parallel, Fiber-Optic CXP Transceiver for  

12 × 12.5G proprietary application. This transceiver is a 

high performance module for short-range multi-lane 

data communication and interconnect applications. It 

integrates twelve data lanes in each direction with 150 

Gbps aggregate bandwidth. Each lane can operate at 

12.5 Gbps up to 50 m using OM3 fiber and 65 m using 

OM4 fiber. These modules are designed to operate over 

multimode fiber systems using a nominal wavelength of 

850 nm. The electrical interface uses an 84-contact edge 

type connector. The optical interface uses a 24-fiber MTP

 

(MPO) connector. This module incorporates Avago Tech-

nologies proven integrated circuit and VCSEL technology 

to provide reliable long life, high performance, and con-

sistent service.

Applications

  12 × 12.5G proprietary interconnects

  Data Aggregation, Backplane and Proprietary Protocol 

and Density Applications

  Datacom/Telecom switch & router connections

Part Number Ordering Options

AFBR-83CDZ  12x 12.5 Gbps with Full Diagnostic Monitoring
AFBR-83EVB

CXP Evaluation Board

AFBR-83EVK* CXP Evaluation Kit

*  Includes GUI, User Guide, i-Port and Power Supply

AFBR-83CDZ

12 Channel 

×

 12.5 Gbps Transceiver  

CXP Pluggable, Parallel Fiber-Optics Module

Data Sheet

Patent - 

www.avagotech.com/patents

 

Avago Technologies Confidential

Содержание AFBR-83CDZ



























Отзывы: