NOTE
–
The PDB & FC boards can be arranged in different configurations by using
different combinations of the nylon locknuts & nylon 6mm/10mm spacers provided.
11. INSTALL THE RC & FPV GEAR
- Attach the RC and FPV gear to the Mid Plates. The
FPV camera can be mounted using the optional FPV Camera Mount or alternatively it can
be attached directly to the Bottom Plate using its mounting bracket together with an M3
bolt/nut using the slot provided. The FPV antenna can be mounted to the Top Plate in two
different positions. It is recommended to use a coaxial extension cable when mounting the
antenna.
12. ATTACH THE TOP/BOTTOM PLATE SPACERS
– Align the M3x35mm Nylon
Spacers (R240 #3) with the outer holes of the Bottom Plate and fasten with M3x6mm
Button Head Screws (R240 #4).
