3.
ATTACH THE PDB/FC MOUNTING SCREWS
- Insert four M3x25mm Button Head
Screws (R240 #2) into the central holes of the Bottom Plate and fasten with M3x6mm
Nylon Spacers (R240 #2).
4.
ATTACH THE MOTORS
– The arms suit motors with either M3 or M2 style bolt holes.
M3
style motors can be installed using either the 16mm or 19mm spaced holes. Eight
M3x6mm Motor Screws are provided in the Spare Hardware package (R240 #6). Only two
screws are required per motor.
The M3 motor mounting pattern for each arm is different from the left side to the right side.
The arms can be rotated horizontally to find the best mounting position to suit the motor
wire exit angles.
M2
style motors can be installed using the smaller 2mm slots.
5. ATTACH THE ESCS
– The ESCs can be attached to the frame in a number of different
configurations.
