H
H
H
X
X
X
-
-
-
2
2
2
3
3
3
8
8
8
4
4
4
Z
Z
Z
/
/
/
H
H
H
X
X
X
-
-
-
3
3
3
3
3
3
1
1
1
6
6
6
0
0
0
8
8
8
Z
Z
Z
48
CHAPTER 8 REMOTE CONFIGURATIONS
8.1 Telnet Commands
You can operate and configure the Switcher via a remote terminal session using Telnet.
Follow the steps as below to log into the Switcher by means of a Telnet session:
1. Connect the Switcher to LAN port of your network with RJ-45 cable.
2. Power on both Switcher and control PC.
3. Open a terminal session (command line) on your control PC.
4. At the prompt, key in the Switcher’s IP address as below:
TELNET [IP Address]:
192.168.0.3
5. Press
Enter
Please switch the DIP Switcher PIN 7 to UP and PIN 1-5 to DOWN for LAN
configuration. The command examples for this chapter are for HX-2384Z reference.
8.1.1 Command List and Reboot
Once the connection with Switcher is established, the Telnet prompt screen will appear,
type
help
[Enter] to show the command list.
Figure 8-1 Help Command
-
Display the command list.
HX-2384Z> help [Enter]
-
Reboot the IP Module.
HX-2384Z> reboot [Enter]
