Page
12
of
56
Attach dome cover with captive fasteners
8.
If using the MCD-4S accessory plate, tighten the two captive fasteners with the
supplied Philips head screwdriver to secure the dome cover to the user
supplied 4S junction box. Tightly insert the two black plugs supplied with the
MCD-4S for the remaining open holes. Cut any excess off the rubber plugs,
flush against the dome cover, with a utility knife.
Attach the MCD-4S accessory plate to the user supplied 4S junction box
NOTE: The supplied security torx screws may also be used.
