Page
15
of
45
Usage of Ethernet cable other than included M/F PoE cable
1.
Insert CAT 5E cable into Grommet Installation Tool.
2.
If intend to use AC/DC power to power up the camera, insert the wire (not supplied) into grommet.
3.
If intend to use I/O cable, insert the supplied cable into grommet.
4.
Insert Ethernet cable with tool on it into the grommet as shown. Make sure the grommet is installed
from the correct side.
5.
Remove grommet installation tool.
NOTE:
If using AC/DC power cable, I/O cable, or Audio cable, make sure caulk the grommet to
avoid water leakage.
