6
Receiver Rear Panel
①
ETHERNET:
Used for Ethernet extension together with the ETHERNET port of
transmitter.
②
HDBT IN:
RJ45 port to connect the HDBT output port of transmitter by CAT6A
Ethernet cable. The LINK LED illuminates when there is a valid HDBaseT link
between the transmitter and the receiver. The HDCP LED illuminates when the
video contains HDCP content.
③
DISPLAY:
Connects to HDMI display device.
④
ARC IN:
Connects to ARC audio source device (e.g.TV).
⑤
IR IN:
Connects to the IR receiver for IR pass-through.
⑥
IR OUT:
Connects to the IR emitter for IR pass-through.
⑦
RS232:
Connects to RS232 control device (e.g. PC) or a third-party device which
is to be controlled.
⑧
FIRMWARE UPGRADE BUTTON:
Press the button with paper clip or other sharp
tool for 3s to enter firmware upgrade mode. Press the button for 3s again can exit
the mode.
⑨
DC 24V:
DC connector for the power adapter connection.
