4
Transmitter Rear Panel
①
ETHERNET:
Used for Ethernet extension together with the ETHERNET port of
receiver.
②
HDBT OUT:
RJ45 port to connect the HDBT input port of receiver by CAT6A
Ethernet cable. The LINK LED illuminates when there is a valid HDBaseT link
between the transmitter and the receiver. The HDCP LED illuminates when the
video contains HDCP content.
③
SOURCE:
Connects to HDMI source device.
④
LOOPOUT:
Connects to HDMI display device.
⑤
ARC OUT:
Connects to audio player (e.g. amplifier) for ARC audio output.
⑥
AUDIO OUT:
Connects to audio player (e.g. amplifier) for audio de-embedding
from HDMI input.
⑦
IR IN:
Connects to the IR receiver for IR pass-through.
⑧
IR OUT:
Connects to the IR emitter for IR pass-through.
⑨
RS232:
Connects to RS232 control device (e.g. PC) or a third-party device for
RS232 control.
⑩
FIRMWARE UPGRADE BUTTON:
Press the button with paper clip or other sharp
tool for 3s to enter firmware upgrade mode. Press the button for 3s again can exit
the mode.
⑪
DC 24V:
DC connector for the power adapter connection.
