Introduction
www.avaccess.com
5
Rear Panel
1
DC 12V
Connect to the DC 12V 1A power adapter provided.
2
LAN
Connect to an encoder or an Ethernet Switch for
streaming media input.
3
HDMI Out
Connect to display such as TV.
4
Channel ID
This DIP switch consists of four manual switches, which
are used to route the encoder to decoder based on
their positions. For more information, see “
Using DIP
Switch to Perform Routing
”.
Note:
By default, each individual switch is in the up
position.
For the DIP switches in both encoder and decoder,
you must repower the encoder and decoder for
the switch setting changes to take effect.
