Introduction
www.avaccess.com
4
laptop. The encoder is USB 2.0 compliant.
4
Channel ID
This DIP switch consists of four manual switches, which
are used to route the encoder to decoder based on
their positions. For more information, see “
Using DIP
Switch to Perform Routing
”.
Note:
•
By default, each individual switch is in the up
position.
For the DIP switches in both encoder and decoder, you
must repower the encoder and decoder for the switch
setting changes to take effect.
Decoder
Front Panel
No. Name
Description
1
USB Device
Connect to USB devices, e.g. keyboard, mouse and
Udisk.
2
Link LED
On:
The decoder is paired with the encoder
successfully.
3
Power LED
On:
The device is powered on.
Off:
The device is powered off.
