10
Motorized Home Storage Solution Model 1400/1600
Section 2: CIRCUIT REQUIREMENTS
120V Operation
Serious personal injury could occur if
you connect the equipment to the
power source before you have
completed the set up progress. DO
NOT connect the equipment to the
power source until instructed to do so.
Amperage Draw
The Model 1400/1600 motors draws
the following amps under maximum
load:
Motors Draw……………..……….…..12A
Circuit Recommendations
We recommend connecting your
equipment to a dedicated and
grounded circuit that is rated for the
amperage given below. Never replace a
circuit breaker on an existing circuit
with one of higher amperage without
consulting a qualified electrician to
ensure compliance with wiring codes. If
are you unsure about the wiring codes
in your area or you plan to connect your
equipment to a shared circuit, consult a
qualified electrician.
Circuit Breaker……………………..…….15
A
This equipment must have a ground
prong in the plug to help ensure that it
is grounded. DO NOT remove ground
prong from plug to fit into a two-
pronged outlet! If the plug will not fit
the outlet, have the proper outlet
installed by a qualified electrician.
Extension Cords
We do not recommend the use of
extension cords, if you find it absolutely
necessary:
•
Use at least a 14 gauge cord that
does not exceed 50 feet I length.
•
The extension cord must also
contain a ground wire and plug
pin
•
For help ask a qualified
electrician.
