AVY16-ES100 User’s Manual
AuviTran
7
11-
PLUGGING THE BOARD
Please visit AuviTran’s website to make sure the board you wish to install is fully
compatible with your Yamaha equipment.
http://www.AuviTran.com
The card contains sensitive electric components, which can be easily damaged by static
electricity, so the card should be left in its original packing until it is installed.
1.
Switch off and unplug your device.
2.
Remove the two fixing screws and the protection plate as shown below. Make sure
you keep the protection plate and the fixing screws in a safe place for further use.
3.
Insert your board following the inside tracks and push it in as shown below.
You might need to push your board firmly inside the slot to make sure the
connector inside is properly plugged
4.
Fix the board to the Yamaha device with the fixing screws furnished with the
board. Make sure the fixing screws are tightly fixed, if not, the board will not be
correctly grounded.
