AV-WALL-DT4oB
User’s manual
v1.1
Page
16
/
26
3.2.3.1
Stereo mode
Screen
LED Actives
Stream
changed
Action on
the button
Action
Out 1+2:
Outdoor-
Stage3
G: -3db
Led SRC On
Led 1+2 blink-
ing
Out1
(XLR)
Turn left
Go to the next Dante device
Turn right
Go to the previous Dante device
Push
Go to “Out2”
gain control
Out Blu:
Outdoor-
Stage4
G: 0db
Led SRC On
Led 3 blinking
Out2
(XLR)
Turn left
Go to the next Dante device
Turn right
Go to the previous Dante device
Push
Go to
“Bluetooth”
gain control
3.2.3.2
Grouped mode
Screen
LED Actives
Stream
changed
Action on
the button
Action
Group:
Concert
Hall
G: +5db
Led SRC On
Led 1+2+3
blinking
Out1, Out2,
Out3 (L/R )
Mini jack or
Bluetooth
Turn left
Go to the next Dante device
Turn right
Go to the previous Dante device
Push
Go to Bluetooth Control
3.2.3.3
Unavailable devices handling & Dante remote control.
If a source is not available on the network the user is notified after few
seconds by a question mark on the output title.
•
If the current source is changed remotely via Dante controller, there
is 2 different case:
o
The source is already register as a preset, then its label is normally displayed.
o
The source isn’t register as a label then the Dante channel and device currently
connected are displayed.
Unavailable
device
Group:?
Concert
Hall
G: +5db
Unregister
devices
sources
appearance
Group:
01@AVDT-
BOB-542
G: +5db
