AV-WALL-DT4oB
User’s manual
v1.1
Page
15
/
26
3.2.1
Screen brightness
Brightness change are directly visible on the screen. Adjust range goes from 0 to 15.
-
Turn left to decrease the
screen’s
brightness
-
T
urn right to increase the screen’s brightness.
-
Press shortly the button to set the next option: LEDs brightness.
-
Press the button for 5s to exit the configuration mode and return to control mode
Screen
OLED 7
LED 3
Mono
3.2.2
LEDs brightness
During this setting all LEDs are activated:
-
Turn left for decreasing the brightness
-
Turn right to increase the brightness
-
Press shortly the button to set the next option: Sources mapping modes.
-
Press the button for 5s to exit the dimmer mode and return to control mode
Screen
OLED 7
LED 3
Mono
3.2.3
Sources mapping modes
Source mapping modes: 3 modes are available currently:
-
Mono: Outputs sources and gains are mapped independently
-
Stereo: Outputs sources are mapped by group of 2 channels.
o
Out1: Radio Left, Out2: Radio_Right.
o
Gain of Out1 and Out2 are set equals when changed on AV Wall DT4O device.
-
Grouped: Set all the outputs to the same source.
o
Gain of Out1 and Out2 and Out3 L/R are set to equals when changed on the
AV Wall D4TO device.
Screens
OLED 7
LED 3
Mono
OLED 7
LED 3
Stereo
OLED 7
LED 3
Group
